Top 5 steps to clean your car headlights in a systematic way
If you are driving a car, there are some safety features which you must abide with. In this connection headlight plays a vital role. It is very important to keep the headlight keep visible. The headlight has the powerful beam which allows you to see the road. At the same time it makes the other motorist see your vehicle. Thus, it is very important to keep your car’s headlight clean. There are different ways which will define how to clean headlights. In this article we will be able to explain it in detail.
List of things you need for headlight cleaning
In order to clean the headlights you must have some cleaning accessories. It is quite usual that you won’t have those at home. Thus, you need to buy the following:
- Headlight restoration kit
- Headlight lens restoration kit
- 3D white whitening toothpaste
- Microfiber towel
- Sandpaper – 400-3000 grit
- Headlight lens sealer
- Multi surface painters tape
- Car washing soap
- Water
Steps on how to clean headlights
- Step 1- Wash your headlights
It is very important to have a thorough wash of your headlight lenses. In this connection you will require the car soap and water. Also, it is important to wash the surrounding areas so that it becomes easy to place the tape around the headlight.
- Step 2- Use the tape
Before sanding your headlights it is very important to protect the surrounding area so that the paint of the car is not affected. You can easily use the painter’s tape that you have collected among the list of the car accessories. You have to take few strands of the tape and put them around your headlights from where the joint as well as the paint area starts.
- Step 3- Sand away
This is one of the vital steps in car washing process. Take the sandpaper. Now wet it as well as the headlight. Now sand the headlight lens in horizontal or straight strokes. Do not change the direction of sanding. Maintain uniformity. Also make sure you are sanding over the wet surface or else you can get scratches over the lens.
- Step 4- Polish and wax
You have to dry the surface after sanding. Now take some polishing compound over the microfiber towel. Apply it over the headlights and rub it. Go for the rubbing in circular motion. If you want to do it quickly, use the orbital buffer.
- Step 5- UV sealant
The next step in headlight cleaning is to apply the UV sealant. You can easily get it in the kit that you have bought from the market. This will remove all the old and oxidized sealant that you have sanded previously.
You are almost done on how to clean headlights. Now check whether you have got any difference after following all these steps of headlights cleaning. Normally, it is obviously that you get visible result. But, in any case if you don’t see any result, you must go for professional help.
